Reliance two wheeler motorbike insurance renewal online :

Reliance two wheeler motorbike insurance renewal online :

This article precisely explains how to renew your reliance two wheeler motor bike insurance through online.

Step 1: Ensure that you started renewal before the policy end date. You can check it in your previous policy paper which you carry in your bike always

Step 2: Now , from the previous year policy note down Policy number which would be around 16 digits and Engine number which would be 5 digits.

Step 3: Now go to reliance official bike insurance renewal online portal

Step 4 : Choose Existing policy with Reliance as Yes

Step 5: Enter Policy no

Step 6: Enter Engine number

Step 7: Check the tick mark for Accept terms and conditions and Click Renew my policy

Step 8: Now your premium will be calculated automatically including non claim bonus deduction etc.

Step 9: If you want to include any additional benefits like PA cover for paid driver etc, you can include it . But the premium value will increase accordingly. Mostly people don't check additional options

Step 10: Click on payment button and proceed paying as per your convenience viz online internet banking, debit card or credit card

Step 11 : The email id and phone number will be asked . Give your correct email , mobile number information to receive the soft copy of the policy

Step 12: Now you will receive a confirmation of your policy , link to download the soft copy of insurance policy. Click and save the pdf and take printout and keep it in your bike .



In addition , the original hard copy will be sent to the address you mentioned in the policy through postal.

Official Reliance Portal for Online insurance renewal >>

NX Drafting: Invalid annotation specified in entry field | To add diameter symbol , greater than > , less than < symbol in UG NX Drafting

To add diameter symbol in NX

1. In NX Drafting application, select Text Editor Option. In text box type <O> to get the diameter symbol
2. You can also select the diameter symbol in text editor symbols list
3. If you want diameter symbol in NX before dimensions, double click the dimension and in Settings enable diameter option.

NX Error :"Invalid annotation specified in entry field"

1. If we want to enter a note which contains greater than symbol "<" or less than symbol ">" or sometimes both "<text" , NX will show an error and will not allow you to add the symbols when you type them in the Text note editor.

Why is this happening

UG NX software uses this symbol for syntax for introducing some special characters. For example, syntax for adding Phi (to represent diameter ) is <O> , for adding omega symbol is <$2>
So if we simply add the symbol < , > or <xyz> the software will imagine you are trying to add a special syntax.

How to add < or > or <text> in UG NX

1. Open the text editor in UG NX Drafting
2. In add text section, type $ in front of < or > symbol
3. For example , if you want to display <note> , then you have to type $<note
4. likewise if you want to display torque > 50 N.m. them you have to type torque $> 50 N.m

Ipanelonline dynamic password : How to Get Dynamic password

Ipanelonline is one of the trusted genuine online survey website which runs for a long time . It is one of the very few website that provides surveys in regular intervals and pays the users without any complaints.

During redeeming the ipanelonline points into paypal cash, it will ask for the dyamic password to complete the redemption process.


This article explains how to redeem ipanelonline points by providing the necessary details

1. Go to redeem points section in ipanelonline website
2. Choose whether you need cash reward or other rewards
3. If you choose cash reward, choose the denomination available and applicable for you
4. Choose payment method as online payment , paypal and check your paypal address is correct
5. Now, in obtain dynamic password section, type your registered mobile number without country code.
6. Ensure that you doing the redemption process during working hours that is 9 am to 5 pm. Because you may not get dynamic password if you try during night time.
7. Once you receive the dynamic password as SMS to your mobile number, type it exactly (case sensitive) in the redemption form and press OK
8. Now your redemption process will be completed and you will get the cash in your paypal account within 5 to 6 days and it will get automatically transferred into your bank account if you are in country like India and you can manually withdraw it if you live in other countries.

Related article :

• A genuine review about ipanelonline

Fedex Courier : Delivery Exception - Package at station arrived after courier dispatch : Meaning

FedEx is one of the leading courier delivery service company which has its familiarity in most parts of the world including USA, India.
Courier Dispatched means the courier package is sent off to the destination by the sender. If you see this tracking status, then your courier is on the way to your destination.

We can easily check the current status of your courier , in FedEx official website using the tracking number .

Some of the FedEx courier status statements are formed little vague, to interpret the accurate meaning of the status. Vague means explaining or providing the information in unclear manner which makes it difficult to understand for the reader / observer

One of the familiar FedEx courier status of that kind is ,

Delivery Exception - Package at station arrived after courier dispatch.

It means that your courier had been arrived to the station after the courier batch was dispatched for that day. So , they will take back your courier to nearest center and continue the process for next day along with the next batch.

So, if you see this status for your FedEx courier package, then no need to panic , because there is no fault in your parcel, but it will reach you one day later. 

Create arrangements in UG NX : Arrangement vs Explosion

Arrangement Vs Explosion 
In UG NX there are two options provided to work with the Assembly structure .
Both Arrangements and Explosions performs the same operation which is to re-position the components in new positions . But arrangement has one additional control of suppressing the unwanted components for a particular arrangement.



How to create arrangement in UG NX :

1. Open the assembly and load all the components present in the assembly
2. Go to Assemblies - Components - Arrangements
3. Create a new arrangement and now move the components that you want to change the position in the current arrangement
4. Suppress the unwanted components 
5. Check often by switching to the default arrangement and ensure that the initial orientations are not altered.

To use Arrangement in a drawing :

1. In Drafting application, Choose create base view option.
2. In dialog box, pick the arrangement for the drawing view
3. If you have created a model view , you can also select it in the same dialog box
4. And give OK.

Shortcuts in UG NX Unigraphics

Basic File operation  shortcuts in UG NX Unigraphics

1. Command  Shortcut Key Outline
2. Ctrl+N  To Creates a new file which may be part,assy,drawing, fem,sim etc.
3. Ctrl+O To Opens an existing file.
4. Ctrl+S Saves the work part and any modified components.
5. Ctrl+U Runs an NX Open program.
6. Ctrl+Q Exists the Sketch task environment and propagates any changes.
7. Ctrl+Z Undoes the last action.
8. Ctrl+Y Redoes the previously undone action.
9. Ctrl+C Copies the selected objects onto the clipboard.
10. Ctrl+V Pastes objects from the clipboard.
11. Ctrl+D Deletes objects.
12. Ctrl+A Selects all visible objects, based on the selection filter.
13. Ctrl+B Makes selected objects invisible in the display.
14. Ctrl+Shift+B Reverses the hidden status of all objects on selectable layers.
15. Ctrl+Shift+K Makes selected objects visible in the display.
16. Ctrl+Shift+U Shows all objects on selectable layers.
17. Ctrl+W Shows or hides objects by type.

NX: To Create Exploded View in NX UG Unigraphics

Exploded View in NX UG -Unigraphics :
Explosion is used in NX to explode the components of an assembly for illustration purpose which can be used further in drawing.

To create exploded View in UG NX:

1. Open the assembly you want to create the exploded View
2. Ensure the assembly options is enabled
3. Go to Assemblies - Exploded Views - Show Explosion tool bar
4. Click on Create new explosion 
5. Now a new set of tools will be opened which contains hide, show, move icons
6. Use the options in Explosion toolbar to create the explosion by moving the components in the desired  position and hide the unwanted components.
7. Save the exploded View

To import the exploded View in Drawing View

1. Now switch to Drafting application
2. Choose create base view option
3. In the view creation dialog box , select the explosion that you have created.
4. As a best practice, you can create a model view and associate it with the explosion that will be very much helpful when you use them in the drawing views.

If you are supposed to update the explosions often , and in-turn update them in drafting views, you might have experience perfect updation of drawing views.

So, in such cases Arrangements would be the best option.